| Home | Company | Showroom| Awards | Branch Office | Inquire |
 

Product ID: SK201

Sponge HME (FOR USE WITH VENITILATOR/RESPIRATOR)


Single patient use on anesthetized patients and respiratory care patients who require a breathing circuit. The product is intended to be replaced at least once every 24 hours.
Sponge HME (FOR USE WITH VENITILATOR/RESPIRATOR)(SK201)
Specifications:
  • Temperature Output
    • Vt250ml: >28°C, Vt500ml: >28°C, Vt750ml: >28°C, Vt1000ml: >28°C
  • Resistance to flow(ISO 9360): 15/30/60l/min, 0.5/1.1/2.2cm H2O
  • Tidal Volume: 250 ~ 1500ml
  • Dead space (connectors included - ISO 9360): 32ml
  • Weight: 20g
  • Patient: Adult
  • Sterile: Gamma/E.O Gas
Features:
  • Hygroscopic HME media traps patient's own moisture, and minimizes heat loss.
  • Low air flow resistance.
  • Moisture output greater than 29mg H2O/l (ISO 9360).
  • Calcium chloride treated HME media improves effectiveness.
  • ISO standard 15 and 22mm fittings.
  • Patient end.
  • Economic type.
Certificate:
  • FDA
  • EN46002
  • ISO 9001
Ordering information:

  • Minimum Order: Negotiable
  • TEL: 886-2-86782106-7
  • FAX: 886-2-86782108



Copyright (C) Kung Shin Plastics Co., Ltd.. All rights reserved.


Commerce Site .